Philips LX8320 Audio Setup Menu, DVD Setup Menu Options, Setting the analogue output, Stereo

DVD Setup Menu Options

E n g l i s h

Audio Setup Menu

1In disc mode, press SYSTEM MENU.

2Press 1 2 to select ‘Audio Setup’ icon.

3Press OK to confirm.

Setting the analogue output

Set Analogue Output to match your DVD home theatre system’s playback capability. This function can also be accessed via the SURR. button on the remote.

1In ‘AUDIO SETUP PAGE’, press 34 to highlight {ANALOG OUTPUT}, then press 2.

STEREO

Select this to change channel output to stereo that delivers sound from only the two front speakers and subwoofer.

MULTI-CHANNEL

Select this to enable Multi-channel output.

2Press 34 to select a setting and press OK to confirm.

Helpful Hint:

– This feature is not available for SACD playback.

Speaker Setup

This menu contains setup options for your audio output which makes the speaker setup system reproduce high quality surround sound. For details, see page 20.

CD Upsampling

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. This function can also be accessed via the CD UP SAMP. button on the remote.

If you have activated the upsampling, the system will automatically switch to stereo mode.

1In ‘AUDIO SETUP PAGE’, press 34to highlight {CD UPSAMPLING}, then press 2.

OFF

Select this to disable CD-upsampling.

88.2 kHz (X2)

Select this to convert the sampling rate of the CDs twice higher than the original.

2Press 34 to select a setting and press OK to confirm.

Helpful Hint:

– If you select “Multi-Channel” mode, it will disable the CD upsampling feature.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

30

001-045-LX8320-69-Eng2	30	3139 115 23251
		13/08/2004, 11:24 AM