Yamaha HTR-5960 owner manual Treble, 0dB L R, Sports, Notes

5Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level.

VOLUME

or VOLUME

Front panel Remote control

6Press TONE CONTROL on the front panel repeatedly to select “TREBLE” or “BASS” and then rotate the PROGRAM selector to adjust the corresponding frequency response level.

PROGRAM

TONE CONTROL

VCR DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM PHONO

	VOLUME
SP
A	dB
TREBLE	0dB L R

•Select “TREBLE” to adjust the high-frequency response.

•Select “BASS” to adjust the low-frequency response.

Notes

•Speaker and headphone adjustments are stored independently.

•When “TONE BYPASS” is set to “AUTO” (see page 91), and “BASS” and “TREBLE” are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit.

•If you increase or decrease the high-frequency or low- frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

•TONE CONTROL is not effective when the Pure Direct mode (see page 45) is selected or when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 44).

•To enjoy multi-channel sources in surround, see page 48 for details.

PLAYBACK

7Rotate the PROGRAM selector on the front panel (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program.

The name of the selected sound field program appears in the front panel display and in the OSD.

See page 71 for details about sound field programs.

PROGRAM

Front panel

or

STEREO	MUSIC	ENTERTAIN	MOVIE
1	2	3	4
STANDARD	SELECT	EXTD SUR.	PURE DIRECT
5	6	7	8
SPEAKERS	ENHANCER	NIGHT	STRAIGHT
9	0	10	ENT.
			EFFECT
Remote control
VCR DVR	V-AUX DTV/CBL pDVD		MD/CD-R TUNER CD XM PHONO
				VOLUME
SP
A	Sports			dB
TV				L R

Currently selected

surround field program

Notes

•Choose a sound field program based on your listening preference, not merely on the name of the program.

•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 44).

•Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs are applied.

•To display information about the currently selected input source in the OSD, see page 46 for details.

OPERATION BASIC

39