Grizzly T23094 owner manual Setup, UnpackingAssembly, Inventory

SECTION 2: SETUP

UnpackingAssembly

Your tool was carefully packaged for safe transportation. Remove the packaging materials from around your tool and inspect it. If you discover the tool is damaged, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of your shipment, inventory the contents.

If any non-proprietary parts are missing (e.g., a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory

Model T23094 Inventory (Figure 2)
A.	Pneumatic Metal Shear	1
B. Quick Disconnect Air Fitting		1
C.	Bottle for Oil	1
D.	Hex Wrench 4mm	1

	A
D	B
	C

Figure 2. Inventory.

To assemble the pneumatic shear:

1.Remove the plastic plug from the air inlet in the handle.

2.Apply pipe sealant on the threads of the quick disconnect fitting.

3.Thread the fitting into the pneumatic shear air inlet and tighten.

4.Press the trigger, and place a few drops of air tool oil into the air inlet, and release the trigger. The pneumatic shear is ready for use.

Air supply setup tips:

•If the air hose is longer than 25-feet, increase the air pressure to 100 PSI to compensate for air flow restriction.

•For consistent air flow, use air hoses with an inside diameter of 3⁄8" or larger.

•To eliminate air system moisture and maintain automatic lubrication, install a main or in-line filter water separator as far as possible from the air compressor, but before any automatic in-line oiler. See examples in Figure 3.

In-Line			Quick-Disconnect				Steel
Oiler				Fittings			Air Piping
Filter				Male	Female
Regulator
(Optional)
Your							Compressor
Tool
Lead-In Hose				Automatic			Filter
							Water
(Optional)
				Oiler			Separator
		Main Air				Air
	Supply Hose					Regulator

Figure 3. Typical air supply system.

-6- Model T23094 Pneumatic Metal Shear