Grizzly T23094 For Your Own Safety Read Instruction Manual, Before Operating This Equipment

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

	Indicates an imminent hazardous situation which, if
	not avoided, WILL result in death or serious injury.
	Indicates a potentially hazardous situation which, if
	not avoided, COULD result in death or serious injury.
	Indicates a potentially hazardous situation which, if
	not avoided, MAY result in minor or moderate injury.
	It may also be used to alert against unsafe practices.
	This symbol is used to alert the user to useful infor-
NOTICE
	mation about proper operation of the equipment.

Safety Instructions for Pneumatic Tools

KEEP ALL SAFETY DEVICES IN PLACE

and in working order.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation.

KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area.

MAKE WORKSHOP CHILD PROOF. Make sure to lock your shop and shut- OFF the power and air supply.

DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, OR WHEN TIRED.

USE CORRECT AIR PRESSURE.

Exceeding the maximum PSI rating of this tool may cause seal damage, unpredictable operation, or line burst.

-2- Model T23094 Pneumatic Metal Shear