Onkyo TX-NR1007 instruction manual Connecting a DVD Player, DVD player

Connecting the AV receiver—Continued

Connecting a DVD Player

See “Connecting Components with HDMI” on page 25 for HDMI connection information.

Step 1: Video Connection

Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your DVD player ( a , b , or c ), and then make the connection.

•With connection a , you can listen to and record audio from your DVD player or listen in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 or Zone 3 as well, use and , or and .)

•If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the main left and right outputs for connection .

Connection					AV receiver	Signal flow	DVD player
	A	COMPONENT VIDEO IN 1 (DVD/BD)				⇐	Component video output
				DVD/BD IN S		⇐	S-Video output
	C			DVD/BD IN V		⇐	Composite video output
			DVD/BD IN L/R			⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 1 (DVD/BD)				⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1 (GAME)				⇐	Digital optical output

A

b	c	C
	a	B

When you use connection c , you need to assign the digital audio input (see page 51).

L R

COAXIAL	OPTICAL	AUDIO	S VIDEO	VIDEO	Y	PB	PR
OUT	OUT	OUT	OUT	OUT	COMPONENT VIDEO OUT

DVD player

31