Panasonic PT-61LCX70, PT-56LCX70-K manual EZ Sync Connections, Recommended AV Connections continued

Recommended AV Connections (continued)

EZ Sync™ Connections

Follow the connection diagrams below for HDAVI control of a single AV piece of equipment such as a Panasonic DIGA-DVD recorder, RAM theater, or Player theater system. Refer to pages 52-54 for Setup Menu settings and additional control information.

• Optional HDMI and/or optical cables are not provided.

If the connection (or settings) of equipment compatible with HDAVI control has been changed, switch the power of this unit Off then On again while the power of all equipment is On (so that the unit can correctly recognize the connected equipment) and check that DIGA, RAM theater, and Player theater playback operate.

Note

•HDMI 1 is recommended. When connecting to HDMI 2 or HDMI 3, set the input mode to HDMI 2 or HDMI 3 (p. 29) initially before connecting to HDMI 2 or HDMI 3. After connection, confirm the HDMI control functions (p. 52-54).

■Connecting this unit to a DVD recorder and AV amp

■Connecting this unit to the DIGA, RAM theater, Player theater, or HD Camcorder

When using an “EZ Sync” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below.

HDMI	HDMI	AUDIO
(AV OUT)	(AV IN)	IN

•For DIGA : Connect with HDMI cable

•For RAM theater and Player theater :

Connect with the HDMI and audio cables. If audio cable is not connected, you cannot listen to the TV program through the theater system.

•For HD Camcorder : Connect with HDMI cable (HDMI 3 is recommended when connecting to a Camcorder via HDMI.)

or

or
HDMI	HDMI	HDMI
		(AV OUT)
(AV OUT)	(AV OUT)

or

Panasonic AV amp DIGA	Panasonic RAM theater/	DIGA	Panasonic HD
(Panasonic DVD	Panasonic Player theater	(Panasonic DVD	Camcorder
Recorder)		Recorder)

•One AV amp and one DIGA recorder can be operated with this unit.

•Be sure to connect the AV amp between this unit and the DIGA recorder.

■Setting this unit after connections

After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) first to “Off” and then “On” using the Setup Menu. (p. 52-53)

Notes

•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.

•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio. (p. 52-53)

(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)

22