Before Using
Receiver Location
This Projection Display is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.
Situate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce Remote Control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video / Audio connection between components can be made with shielded video and audio cables. For best performance, video cables should utilize 75 Ω coaxial shielded cables. Cables are available from your dealer or electronics store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable you’ll need.
Safety Precaution
Please take safety precautions to prevent the unit from falling over.
WARNING
The unit may tip or fall if not situated on a stable surface, if pushed or during an earthquake. Use a strong rope or chain (not included) to fasten the Projection Display firmly to a strong wall support.
Installation Dimensions Diagram
CAUTION
Keep the unit at least 100 mm ( 4˝ ) away from the wall to provide proper ventilation because warm air is discharged. Blocking the ventilation opening of the cooling fan may damage the unit.
|
| 100 mm (4˝) |
| 100 mm (4˝) |
|
|
| 100 mm |
|
| (4˝) |
Accessories |
| |
1. | Remote Control | (N2QAYB000103) |
2. | Batteries 2 “AA” |
|
Viewing position
To optimize your viewing comfort, please follow the viewing guidelines shown in the diagrams below.
If viewing for an extended period of time, sit as far back from the screen as possible.
< Top view >
70º |
70º |
At least
1.8 m
2.0m
2.2m
6
