Onkyo TX-NR1007 Using Normal Macros, Making Macros, Running Macros, Deleting Macros, Example

Controlling Other Components—Continued

Using Normal Macros

You can program the remote controller’s ACTIVITIES buttons to perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the follow- ing actions:

1.Press the [RECEIVER] button to select the Receiver remote controller mode.

2.Press the [ON] button to turn on the AV receiver.

3.Press the [CD] button to select the CD input source.

4.Press the Play [1] button to start playback on the

CD player.

You can program ACTIVITIES buttons so that all four actions are performed with just one button press.

Making Macros

Each ACTIVITIES button can store one macro, and each macro can contain up to 32 commands.

ALL OFF MY MOVIE,

MY TV,

MY MUSIC

RECEIVER

1	While holding down the
	[RECEIVER] button, press and
	hold down the [MY MOVIE], [MY
	TV], or [MY MUSIC] button until
	the [MY MOVIE], [MY TV], or
	[MY MUSIC] button lights up
	(about 3 seconds).
(3 seconds)
2	Press the buttons whose actions
	you want to program into the
	macro in the order you want them
	performed.
	For the CD example above, you’d press
	the following buttons: [ON], [CD],
	Play [1].
	Note:
	The [MODE] button is invalid at macro
	making operation.

3	When you’ve finished, press the
	ACTIVITIES button again.
	The ACTIVITIES button flashes twice.
	If you enter 32 commands, the process
	will finish automatically.

Note:

Once you have taught new macro commands, the origi- nal macro will no longer work. If you want to retrieve them, you will have to teach again.

Running Macros

Press the [MY MOVIE], [MY TV], or [MY MUSIC] button.

The commands in the macro are trans- mitted in the order in which they were programmed. Keep the remote control- ler pointed at the AV receiver until all of the commands have been transmit- ted.

Macros can be run at any time, regard- less of the current remote controller mode.

Deleting Macros

1	While holding down the [AUDIO]
	button, press and hold down the
	[ALL OFF] button until the [ALL
	OFF] button lights up (about 3
	seconds).

(3 seconds)

2	Press the [ALL OFF] button
	again.
	The [ALL OFF] button flashes twice.

Notes:

•All of the ACTIVITIES buttons will automatically switch to the Easy macro mode when the macro is deleted (page 67).

•When you using Normal macro mode, you cannot use the easy macro command including the change of the source component.

146