Onkyo TX-NR1007 Setting the Multi Zone, Multi Zone-Continued, The “Multi Zone” menu appears

Multi Zone—Continued

Setting the Multi Zone

1	Press the [RECEIVER] button
	followed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] buttons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

7. Hardware Setup

1. Remote ID

2.Multi Zone

3.Tuner

4.HDMI

5.Network

6.Firmware Update

3	Use the Up and Down [q]/[w]
	buttons to select “2. Multi Zone”,
	and then press [ENTER].
	The “Multi Zone” menu appears.
	7–2. Multi Zone
	Zone2 Out	Fixed
	Zone2 Maximum Volume	Off
	Zone2 Power On Volume	Last
	Zone3 Out	Fixed
	Zone3 Maximum Volume	Off
	Zone3 Power On Volume	Last

4 Use the Up and Down [q]/[w] buttons to select an item, and use the Left and Right [e]/[r] buttons to change it.

The items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

■Zone2/3 Out

If you’ve connected your Zone 2/3 speakers to an amp with no volume control, set the “Zone2 Out” and “Zone3 Out” setting, respectively, to “Variable” so that you can set the volume, balance, and tone of zone 2/3 on the AV receiver.

Fixed: The Zone 2/3 volume must be set on the amp in that zone (default).

Variable: The Zone 2/3 volume can be set on the AV receiver.

■Zone2/3 Maximum Volume

With this setting, you can limit the maximum volume for Zone 2/3. When the “Volume Display” setting is set to “Absolute”, the “Maximum Volume” range is 50 to 99. When it’s set to “Relative”, the range is –32 dB to +17 dB. To disable this setting, select “Off”.

■Zone2/3 Power On Volume

This setting determines what the volume will be for Zone 2/3 each time the AV receiver is turned on.

When the “Volume Display” preference is set to “Abso- lute”, the range is “Last”, “Min”, 1 to 99, or “Max”. When it’s set to “Relative”, the range is “Last”, –QdB, –81 dB to +18 dB.

To use the same volume level as when the AV receiver was last turned off, select “Last”.

The “Zone2/3 Power On Volume” cannot be set higher than the “Zone2/3 Maximum Volume” setting.

128