Onkyo TX-NR1007 instruction manual Rear Panel

Front & Rear Panels—Continued

fTuning indicators

RDS (European models) (70):

Lights when tuned to a radio station that supports RDS (Radio Data System).

AUTO (68):

Lights when Auto Tuning mode is selected for AM or FM radio. Goes off when Manual Tuning mode is selected.

TUNED (68):

Lights when tuned to a radio station.

FM STEREO (68):

Lights when tuned to a stereo FM station.

gSLEEP indicator (64)

Lights when the Sleep function has been set.

Rear Panel

hBi AMP indicator (21)

Lights when the “Speakers Type(Front)” setting is set to “Bi-Amp”.

iHeadphone indicator (65)

Lights when a pair of headphones are plugged into the PHONES jack.

jMessage area

Displays various information.

kAudio input indicators

Indicate the type of audio input that’s selected as the audio source: HDMI, ANALOG, or DIGITAL.

lVolume level (62)

Displays the volume level.

mMUTING indicator (64)

Flashes while the AV receiver is muted.

abc d e f g h i j k l m n

o p q r s t u v w x y z A B*

aUNIVERSAL PORT

This port is for connecting the component with the Universal Port connector such as UP-A1 Dock.

bIR IN/OUT

A commercially available IR receiver can be con- nected to the IR IN jack, allowing you to control the AV receiver while you’re in Zone 2/3, or control it when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be con- nected to the IR OUT jack to pass IR (infrared) remote control signals through to other components.

* North American models

cDIGITAL OPTICAL IN 1 and 2

These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD and DVD/BD players. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 51.

11