Continued
3. Select the desired channel in the selected category.
ENGLISH
Presetting channels | Preset search |
• You can store up to 30 preferred channels in the memory. | • In the XM mode, select the desired preset channel. |
1. Select the desired channel with preforming channel |
|
search, direct search or category search. |
|
2. To memorize the channels, perform the steps 2 to 4 | • When using the NUMERIC buttons on the remote control. |
in "Manual presetting" procedure on page 27. | Examples) For “3” : |
| For “15” : |
| For “30” : |
Displaying XM information |
|
• You can display XM information such as channel name, artist name, song title and signal strength.
• In the XM mode, | ■Note: |
| • If the information on artist name, song title or category is |
| not available, it will not be displayed correctly. |
■Signal strength display mode
• If the reception is poor, you can check the signal strength of the XM radio signal and adjust the position of the XM antenna until "GOOD" is displayed.
• Each time the DISPLAY button is pressed, the display mode changes as follows:
→Channel number/name → Artist name → Song title → Category
Volume ← Surround mode ← Signal strength(“GOOD”, “MARGINAL”, “WEAK”, “NO SIGNL”) ←
■Error message and status
• If an operation takes longer than usual or an error occurs, one of the following messages may be displayed.
Message | Status |
ANTENNA | The XM |
UPDATING | The XM user encryption code is being updated. Please wait. |
NO SIGNL | The signal is too weak. Check the antenna connection and reposition it for the best reception. |
LOADING | This receiver is tuning or decoding audio or text data. Please wait. |
OFF AIR | The selected XM channel is not currently broadcasting. Select another channel. |
30
