Setting the Sound Parameter | XM Satellite Radio R-672 manual

R-672(A) 2007.6.15 10:17 AM 페이지 50

SETTING THE SOUND PARAMETER

ENGLISH

•NIGHT (NIGHT MODE) : To adjust the dynamic range compression that makes faint sound easier to hear at low volume levels.

•PLII MSC (DOLBY PLII MUSIC) : To adjust the various surround parameters for optimum surround effect.

•DOLBY HP (DOLBY HEADPHONE) : To select the desired listening mode for each Dolby Headphone mode.

•DOLBY VS (DOLBY VIRTUAL SPEAKER) : To select the speaker layout to be used actually for each Dolby Virtual Speaker mode.

•RETURN : To return to the previous menu.

When selecting the NIGHT MODE

•This function compresses the dynamic range of previously specified parts of the Dolby Digital or DTS sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts.

This makes it easy to hear all of the sound track when watching movies at night at low levels.

■Notes:

•The night mode setting is valid only when the digital signals from the Dolby Digital or DTS program source are being input.

•In some Dolby Digital or DTS softwares, the night mode setting may not be valid.

1.Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “NIGHT”.

2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the dynamic range compression as desired.

0.0

0.1	Lower compression

0.2

:

:

:

0.9

Higher compression

1.0

50

Image 50

XM Satellite Radio R-672 manual Setting the Sound Parameter, When selecting the Night Mode

Contents

CoverA2007.6.15957AM페이지 Safety Instructions Introduction Read this Before Operating Your Unit Contents Connecting Antennas System Connections Connecting Video Components HDMIHigh Definition Multimedia Interface connection Connecting Audio Components Digital input default settings Connecting External INSConnecting Digital INS and OUT Connecting Speakers Connecting Subwoofer PRE OUTConnecting XM only for North America Surround back speakers Switched AC Outlets AC Input Cord Front Panel Controls Fluorescent Display Video 3 in Jacks Setup MIC JackAUX in Jack Remote Controls Remote Control Operation Range Loading Batteries Before operation When selecting the External in as desiredOperations When CD, AUX, Video 1~2 is selected as an input source Operate the selected component for playback Adjusting the tone bass and treble Surround Sound Dolby Virtual Speaker Dolby Pro Logic IIx surroundDolby Pro Logic II surround Dolby Pro Logic Signal format being input Selectable surround mode Enjoying Surround Sound To cancel the surround mode for stereo operation 2CH downmix mode Dolby Pro Logic II/Dolby Pro Logic IIx Music Parameters Dolby Virtual Speaker Parameters Adjusting each channel level with test tone Dolby Headphone Parameters Adjusting the current channel level Memorizing the adjusted channel levels Recalling the memorized channel levels Auto presetting Auto tuningManual tuning Listening to Radio Broadcasts Tuning to preset stations Manual presettingMemory Backup Function Scanning preset stations in sequence XM Satellite Radio only for North America Signing up for XM Satellite Radio Category search Channel searchDirect search Error message and status Presetting channels Preset searchSignal strength display mode Displaying XM information Recording with Tape Dubbing the audio and video signals separately onto VideoRecording Dubbing from video components onto Video Digital Audio Recording with MD Recorder Optical Digital OUT Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation status System Setup Navigating through the setup menu Setup menu flow English When selecting the Subwoofer mode Setting the SystemWhen selecting the AMP Assign When selecting the Tone When selecting the Cinema EQ Setting the Input When selecting the Digital When selecting the Remaster When selecting the Video ModeWhen selecting the Auto Surround When selecting the AV Sync Setting the Speaker Setup When selecting the Auto Setup About the first listening position Preparations English When selecting the Speaker Configuration When setting the speaker size by performing the auto setup When setting the distance When selecting the Speaker DistanceWhen selecting the desired unit About the speaker size When selecting the Speaker Crossover About the crossover frequency When selecting the Room EQ Setting the CH Level Adjusting the current channel level Recalling the memorized channel levels Setting the Sound Parameter When selecting the Night Mode When selecting the C. Width Center width control When selecting the Dolby Plii MusicWhen selecting the Pano Panorama mode When selecting the Dimen Dimension control When selecting the Dolby Headphone When selecting the Wide Dolby Virtual Speaker Wide mode When selecting the Dolby Virtual SpeakerWhen selecting the REF Dolby Virtual Speaker Reference mode Troubleshooting Guide Problem Possible Cause Remedy Specifications Amplifier Section CoverA2007.6.15957AM페이지