Continued
Memorizing the adjusted channel levels
•You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.
1. After performing the steps 1~3 in "Adjusting the current channel level" procedure on page 48, press the ENTER button.
• The “1” of "REF 1" indication flickers.
2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory, then press the ENTER button.
• Each time the CURSOR LEFT(◀)/RIGHT(▶) buttons are pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized into the selected memory.
Recalling the memorized channel levels
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “MODE~”.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired one of REF 1 and REF 2.
• Then the channel levels memorized into the selected preset memory are recalled.
ENGLISH
49
