Continued
•There are three types of video jacks(COMPONENT,
•For your reference, the excellence in picture quality is as follows : "COMPONENT” >
•When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or
•When recording video program sources through VIDEO 1 OUT jacks, you must use the same type of video jacks that you did connect to video playback components such as DVD player, LD player, etc.
•This unit is equipped with a function that
•After connecting the video components, you should set the video mode correctly, referring to the following table. (For details, refer to "When selecting the VIDEO MODE" on page 40.)
■Relationship between the video input signal and the video output signal
Video input signals | Video Mode |
| MONITOR OUTs |
| |||
COMPONENT | (composite) VIDEO | Setting | COMPONENT | (composite) VIDEO | |||
|
|
|
|
|
|
| |
|
|
| “AT”(Auto) | Component | Composite video | ||
|
|
|
|
|
|
| |
◯ | ◯ | ◯ | “CPN”(Component)*1 | Component | × | × | |
|
|
| |||||
|
|
| “CPS”(Composite)*2 | Composite video | Composite video | Composite video | |
◯ | ◯ | × | “AT”(Auto) | Component | |||
|
|
|
|
|
|
| |
◯ | × | ◯ | “AT”(Auto) | Component | Composite video | Composite video | |
|
|
|
|
|
|
| |
◯ | × | × | “AT”(Auto) | Component | × | × | |
|
|
|
|
|
|
| |
× | ◯ | ◯ | “AT”(Auto) | Composite video | |||
|
|
|
|
|
|
| |
× | ◯ | × | “AT”(Auto) | ||||
|
|
|
|
|
|
| |
× | × | ◯ | “AT”(Auto) | Composite video | Composite video | Composite video | |
|
|
|
|
|
|
|
*1 : Component video signal can be output from the MONITOR COMPONENT OUT jacks only.
*2 : The video signal set in the VIDEO MODE menu can be output from all the types of MONITOR OUT jacks.
3. CONNECTING AUDIO COMPONENTS
• The TAPE IN/OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc.
ENGLISH
7