To achieve a sound performance that is correctly aligned to your room, make sure all of the leads carrying signals for the RIGHT channel loudspeaker are connected to the RIGHT input to the amplifier from your preamplifier or CD player etc. Signals for the LEFT channel should be wired in a similar fashion.
CONNECTING THE MAINS SUPPLY
Now that your Plinius 8200 Integrated Amplifier is configured to your system correctly, the mains cable can be plugged into the IEC socket on the back of the amplifier. Ensure that the processor switch on the back panel is correct for your intended usage (normally ‘bypass’), and check the speaker cables are connected correctly. Flick the power switch on the front panel to the right. The power LED will pulse for five seconds as the internal microprocessor allows the internal circuitry to stabilise before opening the mute circuit. You can now enjoy your new Plinius 8200 Integrated Amplifier.
WARM-UP PERIOD
You will find that the Plinius 8200 will become noticeably ‘warmer’ in sound after being on for a period of time. We usually recommend waiting at least 24 hours before expecting the best quality of sound reproduction from your amplifier. Also, as the Plinius 8200 uses very little power while on, we suggest leaving the unit turned on so that it will always be at it’s sonic best.
13
