XM Satellite Radio R-672 manual Digital Audio Recording With Md Recorder, Continued, English

R-672(A) 2007.6.15 10:17 AM 페이지 32

Continued

3. Start recording on the VIDEO 1.

ENGLISH

4. Start play on the VIDEO 2 and the CD respectively.

•The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers.

■Note: Be sure to observe the order of the above steps 1 and 2.

DIGITAL AUDIO RECORDING WITH MD RECORDER

•Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to "CONNECTING VIDEO COMPONENTS", "CONNECTING AUDIO COMPONENTS" and "CONNECTING DIGITAL INS and OUT" on pages 6~8 and the operating instructions of the MD recorder or CD recorder.

■Notes:

•Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.

•In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.

•There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of your digital recording equipment to know what restrictions are imposed.

1. Select the desired of CD, AUX, VIDEO 1~2 as a

recording source.

3. Start recording on the component connected to the

OPTICAL DIGITAL OUT.

2. For digital recording, select the digital input as recording

signal input.

■Note :

•When the digital signals are not input from the selected digital input, there will be no recording.

(For details, refer to "When CD, AUX, VIDEO 1 ~ 2 is selected as an input source" on page 16.)

4.Start play on the desired input.

32