![](/images/new-backgrounds/1280595/28059511x1.webp)
How to attach the stand
NOTE:
•Unplug the AC cord from the wall outlet.
•Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit.
•Do not touch or press the
Place the TV on its front onto a table.
Align the stand’s
It will fit in only one direction.
Hold the unit and attach the stand slowly, as shown in figure 1.
LCD PANEL SIDE
Figure 1
Figure 2
Finally secure the
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and could result in damage or injury from
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back (see page 5).
EN 6