Sansui SLED3200 Checking the digital signal strength, Labeling channels, Labeling video inputs

Checking the digital signal strength

This TV will allow you to view the digital signal meter for digital channels.

1	Select “Channel ⇒ DTV Signal”, then press ▶ or
	ENTER.
2	The digital signal strength screen will appear.
	If necessary, adjust the direction of the antenna to
	obtain the maximum signal strength.

CH DTV Signal

0 50 100

Signal Level

NOTE:

• Signal meter feature is not available for analog channels.

• After 240 seconds, DTV Signal screen will return to normal TV operation automatically.

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

1	Select “Channel ⇒ Ch Label”, then press ▶ or
	ENTER.

Press ◀ or ▶ to select a channel you want to
2 label, then press ▼.
	CH		Ch Label
		Channel Number		15-1
		Ch Label		CH-1
		Label Clear		>>

Press ◀ or ▶ repeatedly until the character you
3 want appears in the first space.
	CH		Ch Label
		Channel Number		15-1
		Ch Label		CH-1
		Label Clear		>>
The characters rotation as follows:
-				, () @ / + = -

SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.

4 Repeat steps 2-3 for other channel.You can assign a label to each channel.

5 When you finish inputting the label name, press EXIT to return to the normal screen.

To clear a Ch Label

After step 2 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.

NOTE:

• The channel labels will be reset after “Automatic Search” on page 18.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1	Select “Setup ⇒ Video Label”, then press ▶ or
	ENTER.
	Press ▲ or ▼ to select an input which you want to
2 label.
	Press ◀ or ▶ to select the desired label for that
3 input source.
		Video Label
		Video 1	-
		Video 2	-
		Component	-
		HDMI 1	-
		HDMI 2	-
		PC	-

–/ VCR / DVD / STB / Cable / Satellite / Receiver / Game / Camcorder / PC / DVI PC / Blu-ray

19EN