Nortel Networks 1000M warranty Unpacking Help files for Virtual Terminal Emulator

Installing a Signaling Server Page 445 of 456

8Click Save and Transfer to transfer the updated IP Telephony node information to the other elements of the node. Refer to Transferring IP Telephony files, and IP Line: Description, Installation, and Operation (NN43001-500) for detailed instructions on transferring IP Telephony node information.

End of Procedure

Unpacking Help files for Virtual Terminal Emulator

Help files for the Virtual Terminal Emulator (VTE) component of Element Manager are copied to the Signaling Server as compressed files during installation of the Signaling Server software.

Unpacking the Help files is optional. However, they can be unpacked at any time after the Signaling Server software is installed. To unpack the files, refer to Signaling Server: Installation and Commissioning (NN43001-312).

IMPORTANT!

Unpacking the Help files takes approximately 20 to 30 minutes. Nortel recommends that you unpack the files during a service outage.

Refer to Element Manager: System Administration (NN43001-632) for more information on Element Manager and the Virtual Terminal Emulator.

Logging in to the Signaling Server

Use Procedure 81 on page 446 to log in to the vxWorksTM shell to access the Signaling Server from a maintenance terminal.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning