Preparing for installation Page 63 of 456
a.With a flat blade screwdriver, turn the lock clockwise on the two locking latches (see Figure 17 on page 63).
Figure 17
Locking latches on the module cover
Slide to unlatch cover
Turn lock screw
up to lock
b.Simultaneously push the latches toward the center of the cover and pull the cover toward you while lifting it away from the module.
c.Set the covers aside until the installation is complete.
3Remove the front and rear grills from each pedestal:
a.Loosen the two captive screws that secure the grill.
b.Pull the grill forward and lift it out of the base of the pedestal (see Figure 18 on page 64).
c.Set the grills aside until the installation is complete.
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
