Page 202 of 456 Cabling Common Equipment in a Single Group system
Connecting the Core/Net backplanes
The Shelf 0 and Shelf 1 backplanes must be connected with two NT8D99AD cables (Core/Net modules only).
Procedure 28
Connecting the Core/Net backplanes
1Connect one NT8D99AD cable from the “E” port in Core/Net 0 to the “E” port in Core/Net 1.
2Connect a second NT8D99AD cable from the “D” port in Core/Net 0 to the “D” port in Core/Net 1. See Figure 82.
Figure 82
Connecting the Core/Net backplanes
|
|
|
| Network backplane |
|
|
|
| System Montior |
|
| Core backplane | (XSM) connections | |
|
|
| ||
GND |
|
|
| J3 |
VCC |
|
|
|
|
+ 12 |
|
|
|
|
GND |
|
|
| J2 J1 |
GND |
|
|
| |
VCC |
|
|
| |
|
|
|
| |
FLOPPY DRIVE |
|
|
|
|
IDE SECONDARY CHANNEL |
|
|
|
|
2 | 1 |
| E | D |
|
|
| ||
|
|
|
| |
To other | E | NT8D99AD cable |
| |
|
| |||
Core/Net | D | NT8D99AD cable |
| |
|
|
|
| |
