Page 172 of 456 Connecting a system terminal or modem
Figure 68
Terminal connection diagram
| NORTEL |
Terminal |
|
| NORTEL |
| NORTEL |
Modem | NORTEL |
| |
| NT8D95AJ |
To remote terminal | cable to |
2- or | SDI port |
During the initial installation of a dual CPU system, you may want to temporarily install additional terminals for split mode monitoring, or programming, or both.
Note: In a Large System, I/O ports on the Call Processing (CP) cards can be used to monitor CPU operations. These configurations should not be used as the permanent I/O connection for the system because the port is only active when the associated CPU, or CP card, is active.
