Nortel Networks 1000M warranty Paging Other Pin Mode, Pair color Unit

Cabling lines and trunks Page 269 of 456

Table 37

NT8D37 IPE Module: NT8D14 Universal Trunk Card pair-terminations

Lead designations

RAN	Paging	Other	Pin
mode	mode	modes	numbers	Pair color	Unit
0T/0R	0T/0R	0T/0R	26/1	W-BL/BL-W	0
CP/MB	A/PG		27/2	W-O/O-W
1T/1R	1T/1R	1T/1R	28/3	W-G/G-W	1
CP/MB	A/PG		29/4	W-BR/BR-W
2T/2R	2T/2R	2T/2R	30/5	W-S/S-W	2
CP/MB	A/PG		31/6	R-BL/BL-R
3T/3R	3T/3R	3T/3R	32/7	R-O/O-R	3
CP/MB	A/PG		33/8	R-G/G-R
4T/4R	4T/4R	4T/4R	34/9	R-BR/BR-R	4
CP/MB	A/PG		35/10	R-S/S-R
5T/5R	5T/5R	5T/5R	36/11	BK-BL/BL-BK	5
CP/MB	A/PG		37/12	BK-O/O-BK
6T/6R	6T/6R	6T/6R	38/13	BK-G/G-BK	6
CP/MB	A/PG		39/14	BK-BR/BK-BR
7T/7R	7T/7R	7T/7R	40/15	BK-S/S-BK	7
CP/MB	A/PG		41/16	Y-BL/BL-Y

Note 1: Each of the following I/O panel connectors is cabled as shown

above: connectors A, B, C, D, E, F, G, H, K, L, M, N, R, S, T, and U. These connectors are associated with backplane slots 0 through 15, sequentially.

Note 2: Use LD 14 to select trunk termination impedance (600 ohm or

900 ohm). See the Software Input/Output: Administration (NN43001-611) for information on LD 14.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning