Grundig 26 VLE 8100 BG Initial set-up and tuning ­television channels, Various settings, Help

Settings------------------------------------------------------------------------------------------------------------------------------------------

Initial set-up and tuning ­television channels

The­ television set is equipped with automatic channel search, which searches for satellite chan- nels (DVB-S), terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels.

You start the search and can then copy the tel- evision channels into four favourite lists and sort them there into your order of preference.

For DVB-S channels there are 6000 presets available, for DVB-T and DVB-C channels 1000 presets, and 100 presets for analogue channels.

The various settings

Depending on the type of antenna connected, you can decide which channels you would like the television to search for.

7Tunes digital television channels from the satel- lite, from page 15.

You have two options for this search:

–the basic installation which presets a stand- ard selection, e.g. the satellite Astra 19.2° East; you need only start the search;

–the professional installation, which allows you to make all required settings and set pa- rameters for your receiver system.

7Tunes digital terrestrial television channels, on page 17.

7Tunes digital television channels from the cable provider, on page 17.

7Tunes analogue television channels, in the chapter “Special functions”, starting on page 63.

7Further settings for digital television channels after the initial set-up can also be found in the chapter “Special functions”, starting on page 58.

Note:

Selecting language, country and operating mode

1Switch on the television set from standby with »8«, »1…0« or »P+« or »P-«.

–During initial set-up, the »Installation Guide« will be displayed.

Help:

7If this menu is not displayed, restore the

television­ set to its default settings (see page 49).

2Select the menu language with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

3Select the mode with »<« or »>« and press »OK« to confirm.

–The settings used in »Home Mode« help to save energy.

–Alternatively, the menu item »Shop Mode« can be selected which the retailer can use for demonstrating the device functions.

Note:

7End the »Shop Mode« by restoring the televi- sion set to its default settings (see page 49).

4Select the country in which the television set is operated with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

–The »Source Setup« menu appears with the »Connection Type« line marked.

Note:

7You can find a description of how to tune the television channel of your choice – de- pending on the antenna connected – in the following chapters.

7Make the language and country selection for all types, then continue reading the respective chapter.

­14 ENGLISH