HOME
Manual connection
Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gate- way« and »DNS« values manually. You can ob- tain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP).
1Open the menu with »MENU«.
2Select »CONNECTED APPS« with »V« or »Λ« and confirm with »OK«. Menu is displayed.
3Select »Network Settings« with »V« or »Λ« and confirm with »OK«.
– »NETWORK SETTINGS« menu is displayed.
CONNECTED APPS
NETWORK SETTINGS
Connection | Wireless |
Select Access Point | - - |
Connection Type | Auto |
Connection Settings |
|
IP Address | 192.168.1.100 |
Netmask | 255.255.255.0 |
Gateway | 192.168.1.1 |
DNS | 192.168.1.1 |
Exit | Connect |
Back |
|
Test
4Select »Connection« with »V« or »Λ« and then select »Wireless« with »<« or »>«.
5Select »Select Access Point« with »V« or »Λ« and confirm with »OK«.
–»Select Access Point« menu appears and available wireless networks are scanned and displayed in the menu.
6Select the network that you want to connect with »V«, »Λ«, »<« or »>« and confirm with »OK«.
–Wireless connection password screen is displayed.
7Select the required character with »V«, »Λ«, »<« and »>« and move to the next character with »OK«.
–Select »ABC« for uppercase and »abc« for lower case and confirm with »OK«.
–Select »?@123« for numbers and symbols and confirm with »OK«.
–Enter the password, select »Confirm« with »V«, »Λ«, »<« or »>« and confirm with »OK«.
Note:
7In WEP encryption system, more than one network password can be assigned for the network. Your television can only connect to network with level 1 password.
8Select »Connection Type« with »V« or »Λ« and then select »Manual« with »<« or »>«.
–»IP Address«, »Netmask«, »Gateway« and »DNS« options are active.
9Select »IP Address« with »V«and press »OK«. Enter the IP address with »1…0« and press »« (green) to save the value.
10Select »Netmask« with »V« and press »OK«. Enter the Netmask with »1…0« and press »« (green) to save the value.
11Select »Gateway« with »V« and press »OK«. Enter the Gateway with »1…0« and press »« (green) to save the value.
12Select »DNS« with »V« and press »OK«. Enter the DNS address with »1…0« and press »« (green) to save the value.
13Select »Connect« with »« (red) to establish the modem connection.
–The mesage »Testing ... Please waite« appears.
14Press »« (green) to make sure that the network connection is established with the current settings.
–The messages »Testing ... Please waite« appears, after successfull announcement the messages »Connecting To Gateway: Successful« and then the MAC address.
15Press »MENU« to end the setting.
