61

ENGLISH
speCiAl settinGs ----------------------------------------------------------------------------------------------------------

expert mode

You can restrict the antenna's range or reset
the antenna.
1 Select the line »Installer Mode« with »
v
« or
»
Λ
« and press »oK« to confirm.
– The »INSTALLER MODE« menu appears.
2 Select the preferred option with »
v
«
or »
Λ
«.
– »Limit Position«: Defines the range in
which the antenna may move. Use »
<
«
to set the western limit, use »
>
« to set the
eastern limit.
– »Move Motor«: Aligns the antenna with
the selected satellite. Use »
<
« to align the
antenna to »west«, use »
>
« to align the
antenna to »east«.
– »Go To Stored Position«: Press »oK« to
save the current antenna alignment.
– »Store Stored Position«: Aligns the antenna
with the reference point of the positioner.
– »Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
searching for television chan-nels from the cable provider automatically
1 Open the menu with »menu«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press »oK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
«
or »
Λ
« and press »oK« to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »oK« to confirm.
4 Select the line »Automatic Channel Scan«
with »
v
« or »
Λ
« and press »oK« to con-
firm.
– The menu appears.
5 Select the line »Country« with »
v
« or »
Λ
«
and press »oK« to confirm. In the country se-
lection menu, select the country with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »oK« to confirm.
6 Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7 Select the line »Cable Scan Type« with »
v
«
or »
Λ
« and set the option »Quick« or »Full«
with »
<
« or »
>
«.
– The search function »Quick« sets the chan-
nels according to the information provided
by your cable provide in the transmission
signal.
– If the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support t he search t ype
»Quick«
.
note:
7 You can accelerate the search. To do this,
you need information about the frequency
and
network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.