Connecting a system terminal or modem Page 183 of 456
Figure 72
Modem to SDI port
RJ11 | Smart mode | Terminal | ||||
jack |
| modem | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Modem cable | |||||
| (or NT8D46) | cable Remote end | ||||
Public phone |
|
| |
network |
|
| |
RJ11 | Dumb mode | SDI port on | |
jack | modem | I/O panel | |
Modem cable | Network module | ||
NT8D95 | |||
(or NT8D46) | |||
cable | |||
|
| ||
|
| Rear View | |
Note: The A0381391 modem can be used in this configuration. |
Connecting a modem to switch box, COM2 ports, SDI ports
Use Procedure 23 to connect SDI and COM2 ports to a switch box and a modem (see Figure 73 on page 185 and Figure 74 on page 186).
Procedure 23
Connecting a modem to a switch box, COM2 and SDI ports
1At the remote end, connect an
2At the remote end, connect the cable from the modem to an RJ11 telephone jack. If a cable is required, connect an NT8D46 cable to the modem and to the RJ11 jack.
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
