Nortel Networks 1000M warranty Network Routing Service NRS stand-alone Signaling Server

Installing a Signaling Server Page 417 of 456

Figure 161

Network Routing Service (NRS) — stand-alone Signaling Server

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the Network Routing Service (NRS) configuration for this Signaling Server.

Please enter:

<CR> -> <a> -		H.323	Gatekeeper and SIP Redirect/Proxy Server.
<b>	-	H.323	Gatekeeper only.
<c>	-	SIP Redirect/Proxy Server only.
Enter		Choice>

12Select the Network Routing Service (NRS) to be provided by this Signaling Server. See Figure 160 on page 416 for a co-resident Signaling Server or Figure 161 on page 417 for a stand-alone Signaling Server.

•Enter d if this Signaling Server is configured as a Coresident Leader and is not providing an NRS. Go to step 13.

•Press <CR> or enter a if this Signaling Server is to provide an H.323 Gatekeeper and a SIP Redirect/Proxy Server.

•Enter b if this Signaling Server is to provide only an H.323 Gatekeeper.

•Enter c if this Signaling Server is to provide only a SIP Redirect/Proxy Server.Refer to Network Routing Service Installation and Commissioning (NN43001-564) for more information on the NRS.

Depending on the application configuration selected, either the NRS type: Coresident Signaling Server screen or the NRS type: Standalone Signaling Server screen appears.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning