Nortel Networks 1000M warranty Entering basic system parameters

Installing a Signaling Server Page 427 of 456

–Primary and Alternate NRS IP addresses for this networked system. Refer to IP Peer Networking: Installation and Commissioning (NN43001-313)

–NRS role, if applicable. Refer to IP Peer Networking: Installation and Commissioning (NN43001-313)

Entering basic system parameters

Procedure 79

Entering basic system configuration parameters

1Press the RST button on the faceplate of the CP PM Signaling Server. This cold-reboots the Signaling Server and triggers the Install Tool on the hard drive (see Figure 172)

Figure 172

Install Tool banner screen

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

#####
#########		########
########`` `#############
########		``	`#############
#######`		######```####
#######		######``	`###	NORTEL NETWORKS
#######	#####``		####
####### #####`			#### Communication Server 1000 Software
`#########`			####`
#######`			#####	Copyright 2002 – 2006
`#######			#####’
##########			`###`
##``##########			#

##`########################

`# `########################

###########################``

````````` ````####````

Please press <CR> when ready ... <CR>

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning