Nortel Networks 1000M warranty Connecting a switch box and terminal to COM1 and COM2 ports

Connecting a system terminal or modem Page 175 of 456

Figure 69

One terminal for the COM1 ports

Terminal
NT8D95
cable		J25 on
		I/O panel
Network Module		Terminal
SDI port on		Core/Net 1
I/O panel	Core/Net 0	NT8D95
		cable
	Rear View	553-A0133

Connecting a switch box and terminal to

COM1 and COM2 ports

Use Procedure 19 to connect COM1 ports to a switch box and a terminal (see Figure 70 on page 176).

Procedure 19

Connecting a switch box and terminal to COM1 and COM2 ports

1Set the terminal to 9600 baud, 7 data, space parity, one stop bit, full duplex, XON.

2Connect an NT8D95 cable to the terminal and to the switch box.

3Connect NT8D95 cables to a matching connector on the switch box. When using an A0377992 ABCDE box, connect:

—CPU 0 to connector A.

—CPU 1 to connector B.

4Connect the NT8D95 cables from the switch box to J25 on the I/O panel in the rear of the cPCI Core/Network Modules.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning