Installing a Signaling Server Page 397 of 456

5Set the baud rate for the serial port on the Signaling Server to 9 600 b/ps. See Signaling Server: Installation and Commissioning (NN43001-312).

Note: The IBM X306m Signaling Server ships with the serial port set to 9600 b/ps.

6Configure the connected maintenance terminal. See Signaling Server: Installation and Commissioning (NN43001-312).

7Press the Power switch.

Note: Refer to the Signaling Server Product Guide on the CD-ROM shipped with the IBM X306m Signaling Server for additional operating information.

End of Procedure

Connecting an HP DL320-G4 Signaling Server

In geographic regions that are susceptible to electrical storms, Nortel recommends that you plug the HP DL320-G4 Signaling Server into an AC surge suppressor.

Figure 141 shows the rear view of the HP DL320-G4 Signaling Server.

Figure 141

HP DL320-G4 Signaling Server (rear view)

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning

Page 397
Image 397
Nortel Networks 1000M warranty Connecting an HP DL320-G4 Signaling Server, HP DL320-G4 Signaling Server rear view