Nortel Networks 1000M warranty Installing a Signaling Server Page 435

Installing a Signaling Server Page 435 of 456

Figure 183

IP Telephony parameter configuration

•Proceed to step 16 on page 423.

•If this is a stand-alone Signaling Server and not associated with a Call Server (that is, b was selected in step 11 on page 416), enter the TLAN subnet parameters as required. The Call Server IP address is automatically set to 0.0.0.0.

The IP information applies to a temporary IP Telephony node. This ensures that the existing node is not impacted. This also preconfigures the IP Telephony node files. In Signaling Server: Installation and Commissioning (NN43001-312), the node files are imported to Element Manager for further configuration.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning