Nortel Networks 1000M warranty Signaling Server role selection

Page 414 of 456 Installing a Signaling Server

Figure 157

Signaling Server role selection

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Note: This step will over-write all existing configuration parameters on this Signaling Server.

Please select the role of this Signaling Server.

If this Signaling Server will be a Leader then its data networking and IP Telephony parameters must be entered now. (This will pre- configure the IP Telephony node files.)

If this Signaling Server will be a Follower then its data networking and IP Telephony parameters must be configured through Element Manager later.

Please enter:

<CR> -> <a> - Set this Signaling Server as a Leader. <b> - Set this Signaling Server as a Follower. <q> - Quit.

Enter Choice>

10Configure the Signaling Server as Leader or Follower. See Figure 157 on page 414.

•If there is already a Leader Signaling Server in the IP Telephony node, enter b at the prompt to set this Signaling Server as Follower. The Follower Signaling Server configuration screen appears (Figure 158 on page 415). Go to step 10 on page 434.

NN43021-310 Standard 02.01 December 2007