Nortel Networks 1000M Planning and designating a Main Distribution Frame, About terminations

144

Page 133 of 456

Planning and designating a

Main Distribution Frame

Contents

This section contains information on the following topics:

About terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Installation and designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Terminal block requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Installing the BIX cross-connect terminal. . . . . . . . . . . . . . . . . . . . . . . 134

Installing the Krone cross-connect system (UK) . . . . . . . . . . . . . . . . . 138

About terminations

All Large System terminations are cross-connected on frame-mounted or wall-mounted modules and connecting blocks. The layout of the blocks can vary to meet the requirements of the site.

DANGER OF ELECTRIC SHOCK

Tip, ring, A, B, E, M, ESC, and ESCG connections can be considered to be Telecommunication Network Voltages (TNV).

Installation and designation

Refer to the manufacturer's documentation for recommendations and detailed procedures on installing and labelling the cross-connect blocks.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning