Nortel Networks 1000M warranty Follower Signaling Server configuration, Application configuration

Installing a Signaling Server Page 415 of 456

Figure 158

Follower Signaling Server configuration

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=======================================================================

This Follower Signaling Server will obtain its data network and IP telephony configuration from the Leader Signaling Server at boot.

To identify this Signaling Server, please enter a Hostname.

Hostname : SS_Node276_Ldr

•If there is not already a Leader Signaling Server in the IP Telephony node, or if the Signaling Server is to be a stand-alone Signaling Server, enter a at the prompt to configure this Signaling Server as Leader. The Application configuration screen appears (Figure 159 on page 415).

Figure 159

Application configuration

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the application configuration for this Signaling Server.

Please enter:

<CR> -> <a> - Co-resident (LTPS + VTRK + NRS).

<b> - Stand-alone (NRS only - no Call Server). <q> - Quit.

Enter Choice>

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning