
Positioning and leveling equipment Page 73 of 456
Figure 22
Positioning spacer gaskets
Gasket placement
Rear | Front |
f.Attach a spacer to one side of each module, except the end column (see Figures 23 and 24).
—Position a spacer against the module.
—Insert one standoff between the spacer and module.
—Insert the one screw and tighten.
—Repeat the process for the remaining standoff and screws.
CAUTION
Damage to Equipment
Do not try to adjust the horizontal position of a column by tightening the spacer screws. Tightening the screws with the columns too far apart will warp the spacer.
g.One at a time, push columns together, level, align, and attach the other side of the spacers.
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning