CARE AND CLEANING
3. CONTROL PANEL / TRIMS / INNER DOOR PANEL & GLASS
OVEN
DOOR
TRIMS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent any build up of soiling which may detract from the appearance of the cooker. The recommended method of cleaning is to wipe over the trims with a clean, soft cloth wrung out in warm water, or mild non abrasive cleaner. (If in doubt try the cleaner on a small area of trim which is not noticeable in normal use), then after wiping with a cloth wrung out in clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed. Stubborn stains can be removed by using a well soaped, fine steel wool soap pad.
DO NOT use scouring pads, or abrasive powder, which will scratch the glass.
4. REPLACEMENT OF THE OVEN LAMP
Warning: To avoid electric shock - please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold, before removing the lamp lens,.
Open the oven door and remove the oven shelves. Using a thick cloth, grip the lamp lens, unscrew anti- clockwise and remove the lens.
Carefully unscrew the bulb
OVEN LAMP
5. HOW TO CLEAN THE LAMP LENS
Warning: To avoid electric shock - please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold, before cleaning the lamp lens.
Open the oven door and remove the oven shelves. Using a thick cloth, grip the lamp lens, unscrew anti- clockwise and remove. Clean with a
OVEN LAMP
DO NOT use scouring pads, or abrasive powder, which will scratch the glass lens
33
