Cleaning and Care

Hooks (two places)

CAUTION!

●Before cleaning the air conditioner, be sure to turn it off and disconnect the Power Supply Cord.

● Be sure the Intake Grille (Fig. 1 8) is installed securely.

● When removing and replacing the air filters, be sure not to touch the heat exchanger, as per- sonal injury may result.

Cleaning the Intake Grille

1.Remove the Intake Grille.

1Place your fingers at both lower ends of the grille panel, and lift forward; if the grille seems to catch partway through its movement, continue lifting up- ward to remove.

2Pull past the intermediate catch and open the Intake Grille wide so that it become horizontal.

Intake Grille

Cleaning the Air Filter

1. Open the Intake Grille, and remove the air filter.

Lift up the air filter’s handle, disconnect the two lower tabs, and pull out.

Air filter handle

Hooks (two places)

2. Remove dust with a vacuum cleaner or by washing.

Intake Grille

Mounting

shaft

Knob

After washing, allow to dry thoroughly in a shaded place.

3.Replace the Air Filter and close the Intake Grille.

1Align the sides of the air filter with the panel, and push in fully, making sure the two lower tabs are returned properly to their holes in the panel.

2. Clean with water.

Remove dust with a vacuum cleaner; wipe the unit with warm water, then dry with a clean, soft cloth.

3. Replace the Intake Grille.

1 Pull the knobs all the way.

2 Hold the grille horizontal and set the left and right mounting shafts into the bearings at the top of the panel.

3 Press the place where the arrow on the diagram indi- cates and close the Intake Grille.

2 Close the Intake Grille.

(For purposes of example, the illustration shows the unit without Intake Grille installed.)

● Dust can be cleaned from the air filter either with a vacuum

cleaner, or by washing the filter in a solution of mild de-

tergent and warm water. If you wash the filter, be sure to

Intake

Grille

Intake Grille

Mounting

shaft

Mounting shaft Bearing

Knob

allow it to dry thoroughly in a shady place before rein-

stalling.

● If dirt is allowed to accumulate on the air filter, air flow

will be reduced, lowering operating efficiency and increas-

ing noise.

● During periods of normal use, the Air Filters should be

cleaned every two weeks.

Knob

●When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.

●When cleaning the unit’s body, do not use water hotter than 104 °F, harsh abrasive cleansers, or volatile agents like benzene or thinner.

●Do not expose the unit body to liquid insecticides or hairsprays.

●When shutting down the unit for one month or more, first allow the fan mode to operate continuously for about one-half day to allow internal parts to dry thoroughly.

En-11

MW24Y3F specifications

The Friedrich MW24Y3F is a standout in the world of portable air conditioning units, designed for both residential and commercial applications. With its sleek design and advanced features, this model offers exceptional cooling capabilities while ensuring energy efficiency and user comfort.

One of the main features of the MW24Y3F is its powerful cooling capacity. With a BTU rating of 24,000, it is well-suited for larger rooms or open spaces, making it an ideal choice for users seeking effective temperature control without the noise and complexity of traditional central air conditioning systems. This unit can easily cool spaces of up to 1,500 square feet, providing a refreshing respite from sweltering heat.

The MW24Y3F employs cutting-edge technologies that enhance its performance and user experience. Notably, it incorporates inverter technology, allowing for more efficient energy consumption. By adjusting the compressor speed as per the cooling demand, it reduces energy usage while maintaining consistent temperatures. This translates to lower electricity bills and a reduced carbon footprint, making it an environmentally friendly choice.

Another significant characteristic is its user-friendly interface. The unit features a digital display and remote control, enabling users to adjust settings effortlessly from across the room. Additionally, the MW24Y3F includes a programmable timer, allowing for automatic operation based on the user’s schedule, further enhancing convenience.

The air conditioning unit also prioritizes air quality, integrating a multi-stage filtration system that captures dust, allergens, and other pollutants. This feature is particularly beneficial for those with respiratory issues or allergies, providing cleaner, healthier air in the living or work environment.

In terms of installation, the MW24Y3F is designed for flexibility. It can be set up as a window or portable unit, giving users options based on their property layout and personal preferences. Its compact size allows it to fit well in various spaces without compromising aesthetics.

In summary, the Friedrich MW24Y3F combines high cooling capacity, energy efficiency, user-friendly features, and air quality improvement technologies, making it an excellent choice for anyone looking to enhance their indoor climate control.

Friedrich MW24Y3F operation manual Cleaning and Care

Models: MW24Y3F