Hotpoint BS72, BS62 Electronic Clock & Automatic Oven Timer Operation, Auto Cooking Programmes

Models: BS62 BS72

1 44
Download 44 pages 32.94 Kb
Page 12
Image 12
AUTO COOKING PROGRAMMES

ELECTRONIC CLOCK & AUTOMATIC OVEN TIMER OPERATION

AUTO COOKING PROGRAMMES

There are two Auto Cooking programmes that can be selected using your timer:–

(a)To set the timer to switch the oven(s) On and Off Automatically

(b)To set timer to switch on immediately and OFF automatically after a set cook period.

a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY

This allows you to cook at a specified time for a chosen period before the oven switches off Automatically.

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day. Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).

Step 3 Press and hold in the a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY button.

The display will read 0.00 with the cookpot (Manual background ) symbol lit.

Step 4 With the Manual background button still held in, set the required Cook Period using the “+” and “–” buttons.

Manual background Release the buttons and the timer display will revert to the time of day with the Auto symbol and Cookpot ( Manual background) symbol lit.

Step 5 Press and hold in the Manual background button.

The display will read the earliest possible end time for the Cook Period that you have set above.

The Auto symbol and Cookpot (Manual background ) symbol lit.

Step 6 With theManual backgroundbutton still held in, use the “+” and “–” buttons to set the “End Time” (i.e. The time you require the oven to switch off).

Release all the buttons and the timer will revert back to the time of day.

Manual background The “Auto” symbol will remain lit to signify that an Auto Cooking Programme has been set. The ( Manual background) symbol will go out.

Step 7 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.

Note: If your appliance has two ovens: When the timer has been set for one oven it is possible to use the other oven only during the same Automatic programme.

At the end of the Automatic Cook Period the Auto Symbol will flash and an intermittent bleeping sound will be heard.

The bleeping sound will continue for approximately 2 minutes unless cancelled. The “Auto” symbol will continue to flash until the timer is returned to Manual operation (see below).

Manual backgroundStep 8 Press the Manual background button to cancel the bleeping sound. (If 2 minutes has not elapsed).

Step 9 Turn the oven control(s) to the OFF position.

Step 10 Press the Manual background button again to return the oven(s) to Manual Operation. (The Auto symbol will go out)

12

Page 12
Image 12
Hotpoint BS72, BS62 manual Electronic Clock & Automatic Oven Timer Operation, Auto Cooking Programmes