Perreaux SX60m manual 1Unpacking and Placement

1Unpacking and Placement

Unpacking Procedure

Note:

Box

Contents

Placing Your SX60m

Ventilation Requirements

Note:

6

The SX60m is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.

Pull the foam protecting end-caps off either side of the unit and remove the black material covering.

The SX60m Mono-Aural power amplifier is now unpacked and ready for further installation.

Please retain all packaging material for future transport.

1 x SX60m Mono-Aural power amplifier

1 x Product manual

3 x Performance analysis charts

1 x Detachable AC power cord

The SX60m should generally be placed close to your source equipment, thus keeping interconnect cabling between the SX60m and associated components as short as practical. This will reduce the systems susceptibility to radio frequency interference and the negative effects associated with long cables.

The SX60m is a convection cooled amplifier. For optimal performance, the unit MUST receive adequate ventilation.

àPlease do not cover the product with a cloth or similar.

àPlease do not mount the SX60m directly onto carpeted surfaces.

In the event that the SX60m is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).

Please take all necessary steps to ensure that the unit receives adequate ventilation