2 | Instant Install |
Note:
Note:
If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SX60m. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now!
Please take the time to read the SX60m manual thoroughly as it incorporates many features, which will enhance its operation.
Placement
The SX60m is a convection cooled amplifier and best results will be achieved when placed on a solid surface with adequate ventilation. DO NOT place on a carpeted floor or cover the amplifier!
Place the SX60m close or near the source component in order to make as short a connection as possible.
Turn off associated components
This minimises the potential to damage any other components when connecting your SX60m into the system.
Connect source to preamplifier
Connect the audio output from the source component to the input of the preamplifier.
Connect preamplifier to SX60m
Connect the audio output from the preamplifier to the unbalanced (RCA) input at the rear of the SX60m. Refer to Chapter 4 for Rear Panel information.
Connect loud speaker cable to SX60m
Connect your loudspeaker lead to the bindng posts at the rear of the amplifier. Refer to Chapter 4 for Rear Panel information.
Make sure the nominal impedance of the loudspeakers is not lower than 4Ω.
7
