Perreaux SX60m manual For more information on line input specifications, please refer to Chapter

Note:

Note:

Caution!

For more information on line input specifications, please refer to Chapter 11.

Please refer to the operating manual of your preamplifier to verify that the pin assignments of the balanced output connectors correspond to the SX60m balanced inputs. In the event that they are not compatible, the interconnecting cable will need to be altered to suit.

Balanced Output

Balanced Output to other amplifiers (e.g. bi-amping), accepts a standard balanced connector (XLR).

The pin assignments of the balanced XLR output connectors are as follows:

Pin 1: Signal ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal – (inverting)

Shield ground: Chassis ground

For more information on line output specifications, please refer to Chapter 11.

Please refer to the operating manual of your amplifier to verify that the pin assignments of the balanced input connectors correspond to the SX60m balanced outputs. In the event that they are not compatible, the interconnecting cable will need to be altered to suit.

Speaker Binding Posts

Binding posts are clearly marked and colour coded RED Positive

(+)and BLACK Negative (-). This polarity must be observed when connecting loudspeakers, i.e. positive terminal of the SX60m to the positive terminal of the loudspeaker and negative terminal of the SX60m to the negative terminal of the loudspeaker.

Never connect either of the output terminals to ground.

Never connect the amplifier’s output terminals to any device other than a loudspeaker.

Please do not short-circuit the amplifier’s output terminals.

Never connect the output of one amplifier to the output terminals of another amplifier.

Do not over-tighten the binding posts on your amplifier.

11