Attention:
In the event of a malfunction and when cleaning the appliance, remove the power plug from the wall socket. Risk of electrical shock!
•Loosen jammed slices of bread with a blunt wooden object (e.g. a wooden spatula or spoon).
Do NOT touch the heater elements.
•Differences in bread sorts, moisture and the thickness of individual slices influence the browning of the toast. Therefore the bread for toasting should be kept in sealed packaging until required.
Operating Elements
q Bread roll holder w Toasting slots
e Operating button
r Stop button for interrupting the toasting process 
t Button for the 
y Button for the thaw function 
u Toasting dial
i Crumb tray
o Button for
Placement
•Unwrap the power cable from the cable winder on the underside of the appliance.
•Place the toaster on a dry and level surface.
Before taking into use
Heat the appliance up at least five times, at the maximum setting, without insertion of bread slices. For details on cleaning the appliance read the section "Cleaning and Care".
Please take note:
The operating button e only engages when the power cable is connected to a power socket. With the first usage a slight smell may occur (minimal smoke development is also possible). This is normal and dissipates after a short time. Please provide for adequate ventilation.
Adjusting the browning level
The desired level of browning, from "light" (1) to "dark" (7), can be selected with the toasting dial u.
Take note that, subject to the demand made on the toaster, the level of browning can vary somewhat with an unvarying adjustment of the browning regulator u! The less the number of slices inserted, the higher is the browning level. Thus, if you are not intending to toast many slices, always adjust the browning regulator u a little lower.
Toasting
Attention:
NEVER cover the toaster slots w when operating the toaster! There is a risk of fire! The appliance could become damaged!
•After setting the desired browning level, insert the bread into the toaster slots w.
•Press the operating button e downwards. The control lamp integrated into the stop button r glows.
- 3 -
