HP CQ60 manual Removal and replacement procedures

g.Display assembly (see “Display assembly” on page 4-23)

h.Top cover (see “Top cover” on page 4-30)

i.Bluetooth module (see “Bluetooth module” on page 4-35)

j.System board (see “System board” on page 4-38)

k.Fan/heat sink assembly (see “Fan/heat sink assembly” on page 4-41) Remove the processor:

1.Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you hear a click.

2.Lift the processor 2 straight up and remove it.

✎When you install the processor, the gold triangle on the processor 3 must be aligned with the triangle embossed on the processor slot 4.

Reverse this procedure to install the processor.

Removal and replacement procedures 4–45