HP CQ60 manual Removal and replacement procedures

10.If it is necessary to replace the webcam module, release the webcam module 1 as far from the display enclosure as the webcam module cable allows.

11.Disconnect the webcam module cable 2 from the webcam module, and remove the webcam module. The webcam module is available using spare part number 488385-001.

12.If it is necessary to replace the display inverter, release the display inverter 1, located at the bottom edge of the display assembly, from its mounting clips.

13.Disconnect the display panel cable 2 and the back light cable 3 from the display inverter, and remove the display inverter from the display enclosure. The display inverter is available using spare part number 486556-001.

14.If it is necessary to replace the display hinges, remove the two Phillips PM2.5x6.0 screws 1 that secure each hinge to the display enclosure.

15.Remove the display hinges 2. The display hinges are available in the Display Hinge Kit, spare part number 486558-001.

Removal and replacement procedures 4–27