HP CQ60 manual Hard drive

Hard drive

✎The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit.

Description	Spare part number
120-GB, 5400-rpm	504072-001
160-GB, 5400-rpm	498478-001
200-GB, 5400-rpm	505971-001
250-GB, 5400-rpm	498477-001
320-GB, 5400-rpm	498476-001
Hard Drive Hardware Kit	504059-001

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

Remove the hard drive:

1.Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.

2.Lift the right side of the hard drive cover 2, swing it up and to the left, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 486621-001.

Removal and replacement procedures 4–10