Audio board
Description | Spare Part Number |
|
|
Audio board (includes audio board cable) | |
|
|
Before removing the audio board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the following components:
a.Optical drive (see “Optical drive” on page
b.Hard drive (see “Hard drive” on page
c.Keyboard (see “Keyboard” on page
d.Keyboard cover (see “Keyboard cover” on page
e.Power button board (see “Power button board” on page
f.Display assembly (see “Display assembly” on page
Remove the audio board:
1.Release the ZIF connector 1 to which the audio board cable is attached, and disconnect the audio board cable 2 from the system board.
2.Remove the two Phillips PM2.0×4.0 screws 3 that secure the audio board to the base enclosure.
3.Remove the audio board 4.
Reverse this procedure to install the audio board.
Removal and replacement procedures |
