Other Products From DCM
In-Ceiling Loudspeakers
C520
5-1/4” Coaxial In-Ceiling Speaker w/ swivel tweeter
Impedance: 8 ohms
Sensitivity: 85dB
50 Watts RMS/100 Watts Total Frequency Response: 60Hz-20kHz 7-3/4”Dia. x 3-3/4”D
C825
8” Coaxial In-Ceiling Speaker w/ swivel tweeter
Impedance: 8 ohms
Sensitivity: 85dB
60 Watts RMS/120 Watts Total Frequency Response: 40Hz-20kHz 10-3/4”Dia. x 4”D
Home Loudspeakers
DCM6
6-1/2” Two-Way Home Loudspeaker Impedance: 8 ohms nominal Sensitivity: 89dB
75 Watts RMS/150 Watts Total Frequency Response: 58Hz-20kHz 12.992”H x 7.992”W x 7.795”D
DCM10
10” Two-Way Home Loudspeaker Impedance: 8 ohms nominal Sensitivity:94dB
200 Watts RMS/400 Watts Total Frequency Response:35Hz-20kHz 31.312”H x 15.825”W x 12.501”D
C625
6-1/2” Coaxial In-Ceiling Speaker w/ swivel tweeter
Impedance: 8 ohms
Sensitivity: 85dB
55 Watts RMS/110 Watts Total Frequency Response: 50Hz-20kHz 9”Dia. x 3-1/2”D
DCM6C
6-1/2” Center Channel Loudspeaker Impedance: 8 ohms nominal Sensitivity:89dB
75 Watts RMS/150 Watts Total Frequency Response: 58Hz-20kHz 7.992”H x 19.685”W x 7.204”D
DCM12
12” Two-Way Home Loudspeaker Impedance:8 ohms nominal Sensitivity:97dB
250 Watts RMS/500 Watts Total Frequency Response:30Hz-20kHz 33.312”H x 17.638”W x 15.938”D
LOUDSPEAKER PLACEMENT
DCM In-Wall Loudspeakers are designed to work within any interior decorating scheme. They can be installed in virtually any location where flush mounting is possible. To maximize their sound performance however certain guidelines should be followed. For the best stereo reproduction the two loudspeakers should be placed an equal distance from your listening position and separated so that the angle between them, at the listening position, is between 40 and 60 degrees.
For best stereo imaging, we recommend that the units be placed so that the tweeters are as close as possible to the ear level of a seated listener. As this is not always possible in keeping with aesthetic design of a particular room, MODEL W625 and W825 In-Wall Loudspeakers were designed with a pivoting tweeter which rotates to allow you to “aim” the high frequencies toward the listening posi- tion.
Normal Dispersion
Dispersion After Tweeter Adjustment
TWEETER LEVEL ADJUSTMENT
The output of the tweeter can be adjusted to compensate for speaker place- ment/listening positions that are less than ideal. The 0dB position is designed to provide the smoothest frequency response on axis. If the high frequency response is considered to be too strong or too weak, the tweeter level can increased (+3dB position) or decreased (-3dB position) to suit the listeners pref- erence.