Page 248 of 456 Cabling network modules and loops
cCNI slot and port assignments
Each system core shelf contains a minimum of one and a maximum of four cCNI cards. Each cCNI card contains two ports to support up to two Network groups.
cCNI cards are identified by slot and port. Each port is assigned in software to a specific Network group. Use the System Layout Plan to determine the connections for your system.
•Each 3PE card has two faceplate connections: J3 and J4. Two cables are used for each card.
•3PE cards in Network shelves “0” are connected to the 3PE Fanout panel in Core/Net 0.
•3PE cards in Network shelves “1” are connected to the 3PE Fanout panel in Core/Net 1.
Table 32 on page 248 specifies the Network group assignments for each cCNI slot and port. These designations cannot be changed in software.
Table 32
cCNI Network group designations
|
|
| Connected |
cCNI | cCNI |
| to Network |
card slot | card port | 3PE Fanout panel label | group |
|
|
|
|
c9 | 0 | N/A (factory installed directly | 0 |
|
| to the Core/Net backplane) |
|
|
|
|
|
c9 | 1 | Port | 1 |
|
|
|
|
c10 | 0 | Port | 2 |
|
|
|
|
c10 | 1 | Port | 3 |
|
|
|
|
c11 | 0 | Port | 4 |
|
|
|
|
c11 | 1 | Port | 5 |
|
|
|
|
c12 | 0 | Port | 6 |
|
|
|
|
c12 | 1 | Port | 7 |
|
|
|
|
