Page 34 of 456 Introduction

11Connect a system terminal (or modem); go to “Connecting a system terminal or modem” on page 171.

12Install cabling:

To cable Common Equipment, go to “Cabling Common Equipment in a Single Group system” on page 187.

To cable network loops, go to “Cabling network modules and loops” on page 239.

To cable IPE Modules to the MDF and to connect lines and trunks, go to “Cabling lines and trunks” on page 261.

13Power up the system and load the system software; go to “Powering up the system and initial loading” on page 299.

Note: If you are upgrading your system, do not install new software. Instead, return to the upgrade procedures provided in Communication Server 1000M and Meridian 1 Large System Upgrade NTPs (NN43021-458NN43021-475).

14Perform acceptance tests; go to “Performing acceptance tests” on page 335.

15To test circuit cards, see “Acceptance tests” in Circuit Card: Description and Installation (NN43001-311). To test telephones and attendant consoles, see Telephones and Consoles: Description, Installation, and Operation (NN43001-567).

16Replace all covers and grills on the front and rear of the system.

NN43021-310 Standard 02.01 December 2007

Page 34
Image 34
Nortel Networks 1000M warranty 34 of 456 Introduction